Natchez Trace Veterinary Services
Disease Support

How to Administer Subcutaneous Fluids to a Dog

Fluid Administration Instructions:

  1. Grasp the skin with one hand and gently "tent" it upwards, drawing the skin up from the underlying muscle.
  2. Press the sharp end of the needle firmly into the skin, between where your hand holds the skin and the solid muscle of your dog's body. You need to push firmly to enter through all layers of the skin.
  3. Push the needle horizontally, level with the body until you no longer see any of the needle, but only the plastic head attached to the tubing. Your dog may flinch or squeal a bit, but should settle down once the needle is in place.
  4. Once the needle is in place, let go of the tented skin and let it fall back into place. Open up the release valve on the plastic line, so that the fluid begins to drain down and into the needle.
  5. Watch the container of fluid until it reaches the volume recommended.
  6. As fluid runs under the skin, you will see the skin start to balloon with liquid. This does not hurt your dog, although it may feel a bit cool to the touch. The balloon of fluid will slowly settle and spread out under the skin.
  7. Once the appropriate volume of fluid is administered, shut the valve on the plastic line to stop the flow of fluid. Gently remove the needle from your dog by backing it directly out from the skin. It is normal for a small amount of fluid to leak back out of the injection site. The fluid will gradually be absorbed and the balloon will deflate.

Frequency and Volume:

Important Things to Note:

  • Make yourself familiar with turning the fluids on and off.
  • Change the needles every time before use.
  • As you become more familiar with this process, it will get easier.

Helpful Links:

  1. How to Give Subcutaneous Fluids to Your Dog at Home
  1. Restraining a Dog While Standing